Phillips LMSI non-SCSI host bus adapter
The lmsi host adapter subsystem enables the SCSI target
drivers sc01 to communicate
with target controllers and logical units.
This driver implements the Storage Device Interface (SDI)
for the sc01 SDI target driver.
It is also possible for an application to access the SCSI bus
subsystem directly by using the pass-through interface.
This driver is supplied with UnixWare 7 Release 7.1.1, but is no longer supported.
Extreme caution should be exercised when using the pass-through interface.
It is possible to interfere with normal system I/O and cause hangs
if pass-through is used to an active device.
Pass-through should only be used to a device that is otherwise quiescent.
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 25 April 2004