ISDN_CONNECT_B3.ISDN_RESP(D7isdn)

ISDN_CONNECT_B3.ISDN_RESP -- ISDN response to incoming logical call

Synopsis

   #include <sys/stream.h>
   #include <sys/mdi.h>
   #include <sys/types.h>
   #include <sys/scoisdn.h>
   
   typedef struct isdn_connect_b3_resp
   {
       isdnNCCI_t      ncci;
       isdnReject_t    reject;
       isdnNCPI_t      ncpi;
   } isdn_connect_b3_resp_t;

Description

The ISDN_CONNECT_B3.ISDN_RESP message consists of one M_PROTO(D7str) message block containing the response to an incoming logical call ISDN_CONNECT_B3.ISDN_IND(D7isdn). A Network Control Connection Identifier is assigned, which subsequently identifies the incoming call. The reject parameter indicates whether the call is accepted or rejected. Additional protocol-dependent information can be transferred with the ncpi parameter.

Parameters

ncci

Network Control Connection Identifier; see isdnNCCI(D4isdn).

reject

Reject; see isdnReject(D4isdn). Valid values are:

ISDN_REJECT_OK: accept call
ISDN_REJECT_NORMAL: reject call, normal call clearing

Any other reject values will cause the call to be rejected.

ncpi

Network Control Protocol Identifier; see isdnNCPI(D4isdn). The value of this parameter depends on the protocol used.

References

Intro(D4isdn), Intro(D7isdn)

ISDN_CONNECT_B3.ISDN_REQ(D7isdn), ISDN_CONNECT_B3.ISDN_CONF(D7isdn), ISDN_CONNECT_B3.ISDN_IND(D7isdn)

``SCO ISDN adapter drivers'' in Developing MDI network adapter drivers